Technology Has Impacted Us All - 1522 Words

Diego Martinez ENGL 111 4/6/15 First DA Draft Technology has impacted us all, whether socially, mentally or physically. We now depend on this technologic improvement to run our lives for us. But we are blinded by the positive things it brings us that we do not take notice of the hazardous or negative effects it also brings to our lives or the people around us. We must always be aware of the harmful effects of the overuse of electronics, technology pretty much runs our lives these days and has been for years without us taking notice. In our homes, our work places we have computers, phones, and all these different kinds of gadgets helping us get through the day. Sometimes we are just so used to relying ourselves on technology all the time†¦show more content†¦Based on a 2010 Kaiser Foundation study showed that elementary aged children use on average 7.5 hours per day of entertainment technology, 75 percent of these children have a TV or a device in their bedrooms, and 50 percent of North American homes have the TV on all day, children now rely on technology for the majority of their free time, but are still developing sensory, motor, and attachment systems that they are not ready for the chaotic nature of today’s technology. This impact on the developing child has seen an increase of physical, Psychological and behavior disorders that people now are just beginning to notice. Young children require 2-3 hours per day of active play to achieve the adequate sensory stimulation received when touched, and or hugged. More negative effects that technology brings into our society is Cyber-bullying caused by social media being so big. Kids especially are the most vulnerable to this which the perpetrators, anonymously or even posing as other people the victims trust, terrorize individuals in front of peers. These online attacks can scar you and most likely never leave your life, or even end a life. Many victims have even been driven to the point of not wanting to live their lives

Santiagos Code of Behavior Essay - 788 Words

Santiagos Code of Behavior Exemplifying Dignity Belongs to the Conquered. Ernest Hemingway, one of the greatest American writers of all time, is known to write of his main characters having a code of behavior. The two main parts of this code are to never give up, and to be humble and respectful of others. One of Hemingways novels, The Old Man and the Sea, consists of an old Cuban fisherman named Santiago going out to sea, catching a gigantic thirty-foot marlin, but eventually losing it to the sharks. Santiago follows the Hemingway code of behavior, therefore emphasizing and supporting the theme, Dignity belongs to the conquered. Santiagos respectfulness is an example of Hemingways code of behavior. For†¦show more content†¦Within the code of behavior is a code of honor that Santiago illustrates. For example, when Santiagos left hand is cramped because he is forced to carry the load of the fishing line to his left shoulder, he simply tells the hand, Cramp then if you want. Make yourself into a claw. It will do you no good (58). Santiago does not let go of the fishing line to ease his pain because he cannot bear to forfeit his battle with the marlin. This determination to never give up is an indication of Hemingways code of honor. Also, when Santiago is without weapons, cannot see in the dark, and knows sharks are coming to attack his marlin, he asks himself what he will do and responds to his doubts by saying, Fight them. Ill fight them till I die (115). Santiago knows he has almost no chance of matching the sharks ferocity, but fights them because he refuses to quit. Once again, such stubbornness il lustrates the code of honor. In summation, Santiago has opportunities to refrain from troubles like predators or ailments, but does not because he is so honorable that he cannot bring himself to quit. Hemingways uses of respect and honor combine to illustrate that even if one loses the battle, or is conquered, they can still keep their pride, or dignity. Specifically, just before the last of the marlins flesh is to be eaten by the shovel-nosed sharks, Santiago tells him, I am sorry that I went too far out. I ruined us both. But we have killed manyShow MoreRelatedRachel Zeunik. Mr. Fisher. W131. 4/20/17. Killer Obedience.1161 Words   |  5 Pagesbrotherhood, and patriotism. Those in the military place the lives of their fellow men and country above all else. It is the most intense example of selflessness and self-sacrifice. This extended commitment to God and country is made possible through codes, vows, and unquestioned obedience. If a lieutenant is given an order, he will follow through with it because the lives of countless depend on his obedience. A soldier’s actions always contribute to the overall action of the military and work towardsRead MoreAnalysis Of The Movie A Few Good Men Essay1555 Words   |  7 PagesConsequences of Obedience Late one night, two Marines, Lance Corporal Harold Dawson and Private First Class Louden Downey carried out a â€Å"code red† on Private First Class William Santiago that ultimately resulted in Santiago’s death. In the film A Few Good Men, nominated for an Academy Award for best picture and directed by Rob Reiner, Lieutenant Daniel Kaffee, investigates the crime and develops his own opinion on whether the murder of Santiago was ethically stable in terms of Dawson and Downey’sRead MoreThe Old Man and the Sea: Analysis of Santiago841 Words   |  4 PagesThese characters were called the Hemingway Code Heroes. Hemingway Code Heroes followed a strict code of behaviors which allowed them to live their life to the fullest. These Heroes lived simple lives without all the luxuries that others had. They concentrate on the problem at hand and do not get swayed by outside events. Avoiding intense personal relationships allows the Hero to stay focused. In The Old Man And The Sea, Santiago is considered the Hemingway Code Hero for many reasons. Santiago livedRead MoreErnest Hemingway Research Paper3978 Words   |  16 Pageswriting. Admirers often praise Hemingway for how he believes a man should live his life, and how he also emulates this belief in his characters by â€Å"tying the life of the hero to [Hemingway himself]† (Young, 41). These lauders praise Hemingway on his code hero - â€Å"a man who lives correctly, following the ideals of honor, courage and endurance in a world Wang 3 that is sometimes chaotic, often stressful, and always painful†(Weeks, 62). However, there are of course many people who criticize HemingwayRead MoreA Few Good Men Summary938 Words   |  4 Pagesto give a code red, which is an illegal form of disciplinary hazing. Santiago had a medical condition that caused the hazing to turn deadly. The accused marine’s guilt comes into question since they were following the orders of their commanding officer. Introducing the question, when soldiers are given an unethical order by their superior are those soldiers morally correct in fulfilling their duty? The marines claim to live their lives by the code, unit, core, God and country. This code is what madeRead More Psychosocially Therapeutic Aspects of The Old Man and the Sea by Hemingway6795 Words   |  28 Pagestraits which characterize Hemingways literary style. Santiago is the protagonist of the novella. He is an old fisherman in Cuba who, when we meet him at the beginning of the book, has not caught anything for eighty-four days. The novella follows Santiagos quest for the great catch that will save his career. Santiago endures a great struggle with a uncommonly large and noble marlin only to lose the fish to rapacious sharks on his way back to land. Despite this loss, Santiago ends the novel with hisRead MorePsychosocial Aspects of the Old Man and the Sea6923 Words   |  28 Pagestraits which characterize Hemingways literary style. Santiago is the protagonist of the novella. He is an old fisherman in Cuba who, when we meet him at the beginning of the book, has not caught anything for eighty-four days. The novella follows Santiagos quest for the great catch that will save his career. Santiago endures a great struggle with a uncommonly large and noble marlin only to lose the fish to rapacious sharks on his way back to land. Despite this loss, Santiago ends the novel with hisRead MoreA Few Good Men Analysis1331 Words   |  6 Pagesanalyzes and explains his experiment, in which twenty-one male Stanford students were assigned roles as guards and prisoners in a simulated prison. He summarizes the extreme behavior and reactions that resulted in early termination of the experiment, and discusses the power of situational factors in altering the subject’s expected behavior (Zimbardo 116-117). Similarly, in â€Å"The My Lai Massacre,† Herbert C. Kelman and V. Lee Hamilton summarize this atrocious crime com mitted by the U.S. military; furthermoreRead MoreSymbolism in The Old Man and the Sea Essay945 Words   |  4 Pagesgoing out to sea with Santiago are an example of living by this false code. They do not want to accept the pain of Manolin going with Santiago a nd not bringing back something. They don’t have the endurance to accept that loss, although unavoidable, and therefore they lack the pride which encompasses knowing that Manolin and Santiago would have done their best to catch a marlin. Also, Manolin could also fall under this false code because he did not have the endurance to disobey his parents and thusRead MoreEthics and A Few Good Men.2856 Words   |  12 Pagesto train Santiago to respect the Code of the Marines and the chain of command. Private Santiago had broken this chain and written directly to the NIS asking for a transfer, in exchange for offering information about an illegal fence-line shooting. When Colonel Nathan Jessep, commander of the marines sta tioned in Guantanamo Bay, Cuba, learned of this letter, he ordered the training of Private Santiago. In Guantanamo Bay, this training was referred to as Code Red, which was defined as the discipline

The Skunk by Seamus Heaney Essay Example For Students

The Skunk by Seamus Heaney Essay The Skunk by Seamus Heaney is set at night in California. A man is away from his wife and while he is writing in the darkness, a skunk passes by and takes on the qualities of his wife. The themes of this poem are sexual desire, and the love Heaney has for his wife. This poem is highly conversational and heavily descriptive of the environment as well as the feelings of the poet. The poem contains academic terms such as mythological as well as words from a foreign language, such as voyeur in the poem. This poem uses the symbol of the skunk to represent the sacred and sexual relationship that Heaney shares with his wife. It is risky in that the skunk is often viewed as a repulsive wild animal but he uses this animal to make a comparison to his wife, but successful because it shows another side of relationships. It is sacred like the chasuble of a priest, and also repulsive because of its unpleasant odour. The second stanza paints the scene using self-contained end-stopped lines. The desk like softened to a brightness suited for a romantic atmosphere. There is also a reference to sex, the small oranges represent a distinct part of a womans body. At this point, the speaker begins to tense like a voyeur. The word voyeur has a negative connotation showing that the speaker is very uncomfortable with his own self-image. The third stanza is the opposite of the sentence structure of stanza 2. It uses enjambment to accelerate the pace of the poem and to increase in intensity of the poem. It creates a sense of urgency and excitement while allowing a flow of emotions. He describes the relationship he has wife his wife, the words composing and love both imply care and tenderness. While the words broaching and cask, that are often used to describe the process of wine making, focus on the value of the relationship as well as its maturity and age. There is evidence of sensory imagery used in the poem, such as snuffing, inhaling, tang of eucalyptus and mouthful of wine. Making use of the senses evokes the presence of the wife, and underscores the multifaceted and rich aspects of love and sensuality. By using the definite article the before intent and glamorous, it shows the great love he has for his wife. While he has been exiled from his wife, the skunk suddenly reminds him of her, remembering the gentle removal of clothing at bedtime and setting an erotic atmosphere. Her position over the bottom drawer searching for the black plunge-line nightdress returns to the metaphor of the skunk because of the same stance the image of his wife is in. It is however, ironic that Heaneys wife is looking for her dress when he finds her already extremely attractive without anything on. Black is the dominant colour in the poem. The colour has diverse associations with mystery, the night, a wild animal, sex as well as sadness. It is a mixture of glamour, sex and allure. Heaney also uses zoomorphicism to transfer the eroticism he derives from a skunk onto his wife. It shows the naturalness of the relationship, the animal sensuality they experience the primitive nature of sex and the skunk is used to emphasises the context.

3D Printing for the Built Environment-Free-Samples for Students

Question: Discuss is 3D Printing for the Built Environment- Feasible? Answer: Introduction 3D printing is the process of manufacturing an object in three dimension formations with material layer by layer. 3D printing is one of the additive layer fabrication processes, this technology uses a computer-based system to make a 3D model of the object and manufacture it by adding a layer at a time. This technology has enhanced and significantly upgraded into a great instrument for various fields. Merging various fields in single product formed 3D printer as it involves design, electronics, manufacturing, materials and business. 3D printing is known as additive manufacturing, as it is not like subtractive manufacturing and it adds material with lot of layers instead of removing material (Hager, Golonka and Putanowicz, 2016). This is beneficial for many fields such as researchers, manufacturers, designers, engineers and scientists. The 3D printing technology is revolutionising the procedure of manufacturing in various industries. It entirely modifies not only the manufacturing fiel d, but also entire life of people in the future as 3D printer makes feasible to complete model in a single process. 3D printing is an advancement of printing technologies which can manufacture or reproduce elegant structures in one piece. This technology offers direct manufacturing as through a printer, physical product can be generated directly by inputting a design from an idea. 3D printing is an innovative technology, it started in the 80s and named as rapid prototyping. Today, 3D printers offer to manufacture a physical object from digital model as per the imagination. In order to use 3D printer, firstly preparation is mandatory before printing, like designing a 3D file of the object that has to be printed. To design 3D model or file there are many ways such as through CAD software, websites like Blender and Google SketchUp or it can be simply downloaded from online marketplace for pre made designed models (Kellens, et. al., 2017). When the 3D model is ready for printing then the printing process has to be done. For printing process, initially material has to be decided which would be required for the object. 3D printing provides vast variety of materials such as plastics, resins, sand, ceramics, metals, textiles, biomaterials, glass, food and also lunar dust (Peng, 2016). After deciding the materials for manufacturing and finishing of the object for the accurate result of design, the object has to be printed and if it has not been sanded, lacquered or painted to finish it as deliberated then usually it cannot be directly used or delivered. Printin g methods depend on material selected for the project. Printing techniques of each material are described; if plastic or alumide has to be used during manufacturing then fused deposition modelling technology (FDM) and SLS technology would be best suitable. FDM is the most frequently used printing technique because of the number of printers accessible in the market. In this technique the material is being melted and emitted with the help of a nozzle by each layer at a time to 3D print the object. Thickness of the layer is influenced by the quality of 3D print (Sculpteo, 2018). As compared to other 3D printing technologies, FDM is an affordable 3D printing process. SLS technology is a laser sintering 3D printing technique which includes fabrication of an item by melting layers of powder collectively to manufacture an object. If the materials are resin or wax during the additive manufacturing then there are four methods of 3D printing such as Stereo lithography (SLA), Digital light processing (DLP), Continuous liquid interface production (CLIP) and Multi jet printers. A tank is used of remediable photopolymer resin in SLA method. The build plate goes down and where UV laser creates cross section layer by layer then the liquid polymer is exposed to light. DLP method is similar as the SLA method, the difference is that in DLP method a safelight is used instead of UV laser to cure the photopolymer resin (Sculpteo, 2018). DLP method can be used for silver and brass 3D printing. CLIP method is used with a continuous sequence of UV images which are produced by a digital light projector, with the help of an oxygen permeable, UV transparent window under a liquid resin bath. Multi Jet printers are similar to SLA method, in this method UV light is used by poly jet and multi jet 3D printing techniques to link a phot opolymer. A printer jet pours tiny droplets of the photopolymer in the shape of the first layer and not scan laser to cure layers. When metal has to be used as material, then the methods would be DLP, Direct metal laser sintering (DMLS) and Electron beam melting (EBM). DLP can be used for silver and brass 3D prints. Primarily a wax model is 3D printed then lost was casting technique is used as before the wax is melted the pattern has to be made around it to create the object. In DMLS method laser is used as primary source to sinter metal powder through laser cross section layer by layer of the object (Sculpteo, 2018). In EBM method laser is not used during 3D print, instead of laser and electron beam is used to 3D print the metal. This electron beam melts the metal powder layer by layer and has ability of full melting of the metal powder. When multicolour is required during the 3D printing, then the methods used are Binder jetting, Selective deposition lamination (SDL) and Triple jetting technology (Poly jet). Binder jetting is very popular and useful as it provides the facility of producing detailed 3D prints with colour. To apply a layer of powder on the build platform, the automated roller is used. Liquid binder and colour can also be applied to create a cross section of the product. SDL method is processed with the help of paper. In this process layers of adhesive coated paper are stuck together with the support of high temperature roller and then slash with a laser cutter to give the appropriate shape (Fosso, 2017). Triple jetting technology includes printing with the three materials and can also use three colours. 3D printing is experiencing a boom in recent years. This technology is also known as additive manufacturer and helps to design and manufacture products faster than ever before. Hence, it is becoming more potential even if we consider environmental issues. 3D printing is friendly for environment by supportable material. If we think about sustainability then the important part is material used for 3D printing (Chen, 2016). In the last years, there have been some cases where development of 3D printer materials from recycled plastic has been practiced. According to Joshua Pear the plastic fibre from milk jugs is energy efficient. 3D printing is turning waste into fashion as this technology is not only helpful in reducing waste. Whereas, it also offers variety of ways for reuse the waste for the fashion industry. For example, the sports brand Adidas has printed shoe, which has a 3D printed midsole manufactured from recycled fishing nets. 3D printing uses a lot of energy. 3D printers are utilizing lasers or heat 50 to 100 times more electricity than production from traditional techniques to manufacture the same object of the equal weight. However, it has important impact on environment as in many areas electricity has been generated from fossil fuel sources (Liu, et. al., 2016). Less material is being used in 3D printing technology as compared to traditional manufacturing methods. 3D printing methods offers to melt, fuse, bind and sinter the amount of plastic, metal and ceramic. Whereas, in subtractive manufacturing usually cutting has to be done of excess material so the additive manufacturing is very different from the subtractive manufacturing. As energy has not been used to produce extra material and also to remove it during subtractive method has to be done. Hence, it uses less energy as compared to other methods. 3D printing is beneficial for environment as it has the ability to print objects at any place like at store or at home and this reduces the need to transport the objects manufactured. Hence, helpful in lowering the emissions caused with the transportation. 3D printed products are usually up to 50 per cent lighter than the products manufactured through standard techniques (Pirjan and Petrosanu, 2013). Hence, during transportation of the 3D printed products, less energy would be required. Whereas, the transportation is very less of the overall environmental impacts because when a product has to be shipped from thousands of miles away in any other country. 3D printed objects are usually manufactured of thermoplastic, which is not the greenest material and cannot be frequently recycled. Thermoplastic can be recycled by several machines in the market like the material which is from unsuccessful prototypes for use in 3D printers (Mendoza, 2015). Whereas, the more this recycled plastic is being recycled it becomes more delicate which tend users to become reluctant to try it. The industry is trying and working on improving their recycling technologies. 3D printing is environmentally-friendly as it prevents to use traditional petroleum based materials and includes the use biodegradable and renewable plant based sources. The two major plastics used in additive manufacturing come from corn (Rogers, et. al., 2016). Poly lactic acid creates little waste as it is biodegradable, renewable and nontoxic. In this industry because of these reasons this choice is on priority. This industry asks their designers to make lighter weight products. More time would be consumed for making something big. So, they line up the incentive structures of the economies and this would be helpful in meeting environmental priorities. 3D printing offers to manufacture the light weight and strong complex shapes very fast. This technique helps in manufacturing cars and wind turbines and when these products are made with lighter weight parts then they can be helpful in saving energy. 3D printing also has positive impact socially than environmental (Silva Barros, 2017). As 3D printing can be used at any place for printing objects, then this technique should be used in developing countries that are not connected from global supply chains. Additive manufacturing can efficiently employ raw materials and their functionality. In a powder based process, nonconsolidated raw materials are used such as in powder bed fusion that can be reused that would help in diminishing material waste (Boon and Van, 2017). Optimisation in the design of the object has been enabled by free form fabrication of the additive manufacturing. The optimal design will help in reduction of materials, energy, fuel, or natural resources in the product manufacturing. When huge amounts of energy are wasted like in moulding or casting, then the additive manufacturing can change the process and can also save resources utilised on the fabrication of tooling during production. 3D printing is revolutionizing every field. This technique is beneficial for environment in many ways such as, new body parts can be printed and working ovaries for mice can be created. Biologists made infertile mice fertile again by providing them 3D printed ovaries. Hence, it can be said that this technique is helpful in saving the world (Mohr and Khan, 2015). This technique is helpful in predicting natural disasters as 3D geospatial modelling is easy to create, carry and transfer environmental safety messages, 3D landscapes has been best way of communication for geoscientists by satellites designed for disaster response. With the help of 3D printing, scientists can provide an understanding to people regarding landscape and the risk (Insight, 2013). This help in taking prior and effective actions for safety. All over the globe these printed models are being used for the safety purpose, these address critical problems such as cliff erosion, volcanic eruption and wildfires. 3D printi ng technique offers to create a bamboo bike by using natural resources like hemp and resin (Baumann and Roller, 2017). This bike has been created by using sustainably sourced material, holding bamboo rods together by tubular joining pieces called lugs. Lugs have been created by bio fibre and a plant based resin glue. When bamboo bicycle is created by using 3D printing then it has been analysed that lugs have been created from carbon fibre filament, carbon fibre is recyclable. 3D printing can be done on demand, as parts can be manufactured when they are required by producing on demand. This simply means instead of manufacturing products in bulk, now with the help of 3D printing production can be done when the objects are needed. This is beneficial in saving storage (Surange and Gharat, 2016). The less manufacturing of stock allows putting the less capital, on demand production is also beneficial because risk of unsold stock or wastage stock is less and also prevent from selling the stock on discount (Garcia, Claver and Sebastian, 2017). 3D printing lower the carbon dioxide footprint, other manufacturing techniques causes the emission of carbon dioxide because most of the machines use fuel for their operation. The carbon dioxide causes air pollution and global warming. According to the research done by an aerospace and defence research organisation on the environmental impacts of additive printing, it was found that along with the fact that this technique s ave usage of energy and reduce the carbon dioxide emission during transportation, 3D printing also makes lighter aircraft components, almost 40% less carbon dioxide has been used during the production process of these kind of printed parts. Conclusion It has been concluded from the above report that 3D printing technology has positive impact on the environment. 3D printing is also known as additive manufacturing and we have discussed the process of using 3D printing and also discussed about the materials used in this technique. There are different methods of 3D printing according to various materials. We have discussed the advantages and limitations of this technique. 3D printing is having a tremendous impact on industries such as aerospace and automotive to healthcare. This technique is turning waste into fashion, as it is utilizing waste in fashion industry. Huge amount of electricity and energy is being saved in this technique as compared to other techniques. 3D printing prevents the carbon dioxide emission. It is beneficial for environment as it prevents to use petroleum based materials and tends to use biodegradable and renewable sources. With the help of 3D printing technique the transportation has been reduced as it can be used anywhere and this technique offers to manufacture lighter weight products. This technique helps in knowing the disasters previously so that prior safety actions could be taken. 3D printing is an additive manufacturing which is beneficial for environment. References Baumann, F.W. and Roller, D., 2017. Additive Manufacturing, Cloud-Based 3D Printing and Associated ServicesOverview.Journal of Manufacturing and Materials Processing,1(2), p.15. Boon, W. and Van Wee, B., 2017. Influence of 3D printing on transport: a theory and experts judgment based conceptual model.Transport Reviews, pp.1-20. Chen, Z., 2016. Research on the impact of 3D printing on the international supply chain.Advances in Materials Science and Engineering,2016. da Silva Barros, K., 2017.Identification of the environmental impacts contributors related to the use of Additive Manufacturing technologies(Doctoral dissertation, Universit Grenoble Alpes). Fosso Wamba, S., 2017. 3D Printing and Supply Chain Management: A Literature Review and Research Agenda. In5th International Conference on Mechanical Engineering (Meche), September(Vol. 30). Garca-Domnguez, A., Claver, J. and Sebastin, M.A., 2017. Study for the selection of design software for 3D printing topological optimization.Procedia Manufacturing,13, pp.903-909. Hager, I., Golonka, A. and Putanowicz, R., 2016. 3D printing of buildings and building components as the future of sustainable construction?.Procedia Engineering,151, pp.292-299. Insights, M.M., 2013. Layer-by-Layer: Opportunities in 3D printing Technology trends, growth drivers and the emergence of innovative applications in 3D printing. Kellens, K., Baumers, M., Gutowski, T.G., Flanagan, W., Lifset, R. and Duflou, J.R., 2017. Environmental dimensions of additive manufacturing: Mapping application domains and their environmental implications.Journal of Industrial Ecology,21(S1). Liu, Z., Jiang, Q., Zhang, Y., Li, T. and Zhang, H.C., 2016, June. Sustainability of 3D Printing: A Critical Review and Recommendations. InASME 2016 11th International Manufacturing Science and Engineering Conference(pp. V002T05A004-V002T05A004). American Society of Mechanical Engineers. Mendoza, A.J., 2015. Legal and Social Implications of the 3D Printing Revolution. Mohr, S. and Khan, O., 2015. 3D Printing and Supply chains of the Future.Innovations and Strategies for Logistics and Supply Chains, pp.147-174. Peng, T., 2016. Analysis of energy utilization in 3d printing processes.Procedia CIRP,40, pp.62-67. Prjan, A. and Petrosanu, D.M., 2013. The impact of 3D printing technology on the society and economy.Journal of Information Systems Operations Management, p.1. Rogers, H., Baricz, N. and Pawar, K.S., 2016. 3D printing services: classification, supply chain implications and research agenda.International Journal of Physical Distribution Logistics Management,46(10), pp.886-907. Sculpteo, 2018. 3D Printers and 3D Printing: Technologies, Processes and Techniques [Online]. Accessed from: https://www.sculpteo.com/en/3d-printing/3d-printing-technologies/ [2nd April 2018]. Surange, V.G. and Gharat, P.V., 2016. 3D Printing Process Using Fused Deposition Modelling (FDM).International Research Journal of Engineering and Technology (IRJET),3(03).

Definition of Epistemology

Table of Contents What is knowledge? Sources of Knowledge Justification of Knowledge Works Cited Primarily, epistemology centers on the understanding of the theory of knowledge and levels to which such knowledge is legitimate. This one of the most crucial areas in philosophy, for it provides a means of understanding the precepts that make knowledge, its sources, organization, methods of verification, and its confines.Advertising We will write a custom essay sample on Definition of Epistemology specifically for you for only $16.05 $11/page Learn More Through understanding all of this, one is able to distinguish between personal perceptions and the ultimate truth of knowledge. The reality of knowledge depends on its justifiability; that is, epistemology tends to question the truth behind human knowledge hence, through such understanding, individuals are able to form a basis of comprehending any piece of knowledge (Heylighen, p.1). What is knowledge? Kn owledge is any belief with a verification mechanism, depending on the facts of reality behind it. Knowledge not only involves the recognition that different aspects of reality exists, but it also involves correct understanding of such aspects; hence, forming a basis of justifying beliefs. It is important to note that, this definition of knowledge applies the tripartite theory of knowledge, a fact disapproved by the Gettier cases hence, making the preposition lacking. According to the Gettier cases, knowledge cannot be any type of belief with a verification mechanism primarily because, to some extent, the evidential support of some reality concepts maybe out of luck hence, making such evidence unreliable (Pappas, pp. 5-17). Sources of Knowledge Notions and beliefs held by different individuals arise due to different reasons. The varying nature of beliefs held by individuals occurs due the varying nature of wants (which can be either psychological or emotional) and varying perceptions among different individuals. Philosophically, there exists two primary propositions, which explain how humans acquire knowledge namely empiricism and rationalism. According to empiricism, individuals’ experiences play the central role in knowledge acquisition. In addition, because perception determines individuals’ judgmental habits, it is an important component in the knowledge acquisition process. Three main classes of empiricism exists namely classical, constructivism and radical empiricism. Classical empiricism refutes the notion that individuals have inborn concepts; a fact supported by Locke’s idea of the mind being like a blank slate: hence, the importance of the surrounding environments in shaping perception. Closely linked to this is radical empiricism, which states that, senses are the primary sources of knowledge. Therefore, because different individuals have different perceptions of differences occurrences, according to radical empiricists, individu als must have a mechanism of verifying all sensory perceptions.Advertising Looking for essay on philosophy? Let's see if we can help you! Get your first paper with 15% OFF Learn More On the other hand, because human knowledge depends on sensory instincts, acquisition of knowledge must go hand in hand with personal experiences. Lastly, according to constructivism, by using personal experiences, individuals are able to formulate personal guiding rules and mental representations, which they use in understanding their sensory insights and daily experiences (Moser, pp. 72-93). Contrary to the empiricists’ ideology is the rationalists’ ideology, which postulates that, acquisition of knowledge depends on individuals’ ability to reason and encode meaning from life’s occurrences. Rationalists oppose Locke’s idea of the human mind being like a blank slate by arguing that, experiences are there to shape what humans know, because human beings are born with some innate concepts (Moser, pp. 76-94). Justification of Knowledge Because of the varying nature of perceptions held by different individuals on different life occurrences, the truth of a claim depends on available evidence to support such claims. Three primary knowledge justifications propositions exist namely: reliabilism, foundationalism, and coherentism. According to foundationalism, individual infer the truth of a belief from other proved ideas; lack of other proved beliefs means that, such held knowledge is not true because it its proving will lack the justification regress concept. A good example of justified ideas is basic beliefs, a fact that makes this theory to face criticism, because selection of basic beliefs is random (McGrath, Sosa, and Kim, pp. 226-235). Contrary to this is the coherentism ideology, which states that, for a set of beliefs to be true, then they must be coherent. The coherence of a belief depends on three properties namely: comprehensibilit y, consistency, and cohesiveness. For an idea to be consistency, then the primary elements forming such a belief must agree with each other. Existence of any contractions between such elements makes beliefs to lack the coherence property hence, void. Cohesiveness of beliefs depends on the supportive and consistent nature of elements that make up beliefs. Consistence and support are important in truth justification, for it makes beliefs probable (Wray, pp. 53-66). Reliabilism as a mechanism of truth justification is very different from coherentism and foundationalism. According to reliabilism, the justification of a belief depends on its formation methodology. Depending on the belief forming methodology; whether dependable or defective, the outcome of a justification of the truth varies; hence the existence of true and untrue beliefs (Holt, p.1).Advertising We will write a custom essay sample on Definition of Epistemology specifically for you for only $16.05 $11/page Learn More In conclusion, the legitimacy of knowledge held by individuals depends on the ability of individuals to verify such knowledge, by inferring to other beliefs, checking their forming mechanism, or ascertaining their coherence. Works Cited Heylighen, Francis. Epistemology, introduction. Principia Cybernetica,  1993. Web. Holt, Tim. Reliabilism. 2010. Web. McGrath, Matthew, Sosa, Ernest, and Kim, Jaegwon. Epistemology: an anthology. Malden, Massachusetts, 2000. Web. Moser, Paul. The Oxford handbook of epistemology. Oxford: Oxford university  Press, 2002. Web. Pappas, George. Justification and knowledge: New studies in epistemology. Boston: Reidel Publishers, 1979. Web.Advertising Looking for essay on philosophy? Let's see if we can help you! Get your first paper with 15% OFF Learn More Wray, Brad. Knowledge and inquiry: readings in epistemology. Ontario: Broadview Press, 2002. Web. This essay on Definition of Epistemology was written and submitted by user Mae Fisher to help you with your own studies. You are free to use it for research and reference purposes in order to write your own paper; however, you must cite it accordingly. You can donate your paper here.

Religion in Clays Quilt essays

Religion in Clays Quilt essays Clay Sizemore is an endearing character whose life shows how important the Pentecostal religion is to so many people of the Appalachians. Early in the book, the author calls those who don't attend church on Saturday night "sinners" (House 17), and this lays the groundwork for the rest of the book. It shows how important religion is to the people, and how they use religion as a basis for everything they do in their lives. While the Church plays an important part in everyone's life, it does not dominate their lives. They gamble, smoke, drink, and even carouse a bit, because they know they will be forgiven. House writes, "Gabe loved to drink, and he loved to have a big crowd around all the time" (House 25). The Church is a sanctuary for the people of Fire Creek, and it plays an important part in their lives - but it does not dominate everything they do. Unfortunately, it also makes them entirely too wary of strangers who do not believe what they believe, as Easter's reaction to newcomer Marguerite shows "She vowed never to talk to Marguerite again" (House 69). Marguerite is a Catholic who does not go to church, so she does not fit in the community, and the women will not accept her. This shows how narrow-minded they are, and how their religion sometimes gets in the way of their The Pentecostal religion began in Appalachia, and it is a stern and serious religion that people hold on to because it makes them feel better about themselves and the "sins" they may have. Many of the most severe Pentecostals will not drink, smoke, or listen to music other than church music, but the religion has relaxed a little all the time. However, Clay knows he cannot have it both ways, and he cannot continue to go to church when the ways of the church are so strict. He tells Easter "'I can't make myself believe the way you do. And I won't be no hypocrite'" (House 116). ...

Introduction to Government failures Essay Example | Topics and Well Written Essays - 750 words

Introduction to Government failures - Essay Example    Information failure is also another major factor that greatly contributes to governments failures. Because the government does not necessarily know enough details to enable it to make effective decisions on the best way to allocate scarce resources. Most of the economists believe in the efficient market hypothesis. That is, they assume that the market will always contain adequate information than any government or individual.The insinuation is that market values and market movements should be free from interference because individuals or governments cannot improve upon markets. Moreover, taxes on goods as well as services can raise prices artificially and interfere the efficient operation of the market. Also, taxes on incomes can create a disincentive impact and discouraging individuals from working hard to achieve the set goals and objectives in a particular country.Fixing of prices is also another major factor that leads to government failures. The government can fix both mini mum as well as maximum prices that can create distortions that contribute to various shortages. Shortages may rise if the government of a particular country fixes the prices of various products below the market rate. Also, provision of free health care services by the government is another major factor that contributes to its failures. That is, there will be long waiting lists for treatment that might be outnumbering the efforts of health care providers and thus causing failure in the provision of this particular service.

Critical Thinking Assignment Example | Topics and Well Written Essays - 2000 words

Critical Thinking - Assignment Example ce and its property, critical infrastructure, the government and the military, its installations and deploying forces.† (2000: 2) Hence, homeland security consists of the planning and preparations made at both military and civilian levels to make foolproof arrangements for foiling the external and internal threats challenging the peace and stability of the country. The governments and all other political authorities take essential measures to combat with the external and internal threats by ensuring and improving the strategic measures and defense system of the country on the basis of the available data presenting security threats and perils challenging the very foundations of the country. However, sometimes it so happens that the available statements and statistics are unable to provide accurate information, which causes wrong planning and consequently create great hazards in respect of the security of a country. Thus, the law enforcing agencies and security organizations seek help from the thinkers and intellectuals so that the gathered information could be examined and estimated in a proper way. Since critical thinking aims to analyze and examine the information with the help of reasoning, it provides a wide range of thoughtfulness for assessing the data gathered for different purposes. Hence, critical thinking is also helpful in respect of enhancing the security plans of a country. Critical thinking urges the people to contemplate over the situation in order to draw out appropriate conclusions as well as to find out several alternate solutions to a problem under study. It does not allow making of immediate conclusions on the basis of available information in the form of figures, statements, graphs or other presentation. On the contrary, it lays stress upon viewing the information through different angles in order to explore the hidden aspects of that information that have been concealed under the pile of incorrect information and rigged, engineered and

History (access to humanities and social science) Essay - 1

History (access to humanities and social science) - Essay Example (Davis & Moore, 1945: quoted in Zaidi, 1999) The most important factor of social stratification includes the division of society in three main classes i.e. upper, middle and lower. Lower or labor class makes the largest stratum of almost all societies that contains limited income resources and wealth. An overwhelming majority of the individuals belonging to this class has to survive and fulfill their needs and requirements in these scarce resources. Since the poor stratum or lower class is not able to keep the wolf from the door even by working hard from dawn to dusk, almost all members of this class engage themselves in financial activities in order to meet with their growing expenditures. Consequently, the children are also expected regarding lending a helping hand to their parents and senior family members by earning something in one way or the other. Hence, child labor has been in vogue for centuries, and children of lower stratum had been deprived of proper nutrition, adequate l earning facilities basic education and other fundamental rights since ever. The working classes had been undergoing extremely miserable and pathetic situation in all parts of the planet. Their situation was worse in European countries during 18th and 19th centuries, where the exploitation of the innocent children was order of the day. They worked at the houses, farms and agricultural lands of the rich clergy and nobility from dawn to dusk, and did not get any money in return. Industrial revolution of 1750 increased the miseries of the working classes and their children were forced to work in mills and factories with no or nominal remunerations and wages. Since there had been taken place no legislation to protect the rights of women and children at the eve of industrial revolution, there was no statute of law to bar the recruitment of children in industries. It was the time when industry was in its budding and the owners of mills, factories and industrial units required

Seven Eleven Japan Supply Chain

Seven Eleven Japan Supply Chain Established in 1973, Seven-Eleven Japan open its first store in Koto-ku, Tokyo, in May 1974. In 2004 it was owned by the Ito-yokado group, which also managed a chain of super markets in japan and owned a majority share in southland, the company managing seven-eleven in the United States. Seven-Eleven Japan realized a phenomenal growth between the years of 1985 to 2003. The Competitive strategy of Seven Eleven Japan is to provide High-availability of a variety of reasonable products at reasonable prices. The total of the visits number per year for all the Japanese people is almost 35 times, that means each Japanese go on average 3 times a month to a Seven Eleven Outlet. When it started in Japan the new concept of this store was incredibly famous, everybody liked the concept of Seven Eleven. The convenience store supply chain can be responsive if they focus on what the customer wants. 7-eleven knows who is buying which product and at what time, it knows it because the system is really efficient. For each customer the cashier pushes a button with the approximate age, and the cash register the time and the kind of product that the client just bought. Now the system knows who, where and what is sold at any time of the day, the supply chain can be really responsive and offer the good where it is needed. The first online network was established in 1979, so it proves 7-eleven Japan was in front of all others about technologies and supply chain management. Of course they take some risks doing this, because the population can be bored or move. 7-eleven has to be careful about the needs every day, and has to react really quickly to all kind of problems they have to face up. In japan, 7 eleven adopts a strategic fit with the customers; they attempt to know what they need, where th ey need it and when they need it. Every single person is important in statistics for them; they really care on the demand. The main risk for them is the potentially high cost concerning the transportation. I think when you are a huge industry like 7-eleven in Japan, more than 12  000 retailers; you cant focus on every single person. Be the biggest company of outlet stores include that you cannot have a micro supply chain. The biggest risk is that you cant follow the demand, you will be able at the beginning, but after a few time in the market the demand will become huge. It is too much work and if you cant follow, the customers will go to another retailer. 7-eleven must be able to manage with uncertainty. In order to support its supply chain seven-eleven started to remodel the transportation in their supply chain. The number of trucks was really high, and they could use fewer trucks to do all the transportation work. They have different kind of trucks for different kind of goods ( frozen food, warm food †¦). The supply chain worked hard every day to find a way to optimize the facilities, and it worked. Now the store order in the morning and receive in the afternoon, everything is really flexible. The location of the store is based on where the demand is, so they are not looking to open an outlet everywhere, but where people need it and where they will sell more products. They want to optimize the space where they are located. In less than 10 years they did a lot of progress in technologies, and more in inventory management. Now everything can be controlled on computers, and they know what they need. They work with some companies in order to have the best infrastructure. All the stocks depend on local customer demand, each stores have a different stock. Seven-eleven does not allow direct store delivery in Japan but has all products flow through its distribution center. One distribution center works with 50 to 60 retailers, so each store doesnt have to kee p in a huge amount of goods that they dont sell. For some years they know what is sold in which store, so its easy for them to know which items each store needs. Direct store delivery is more appropriate when the store knows it will sell the product in a short period of time. It also is more appropriate when the store wants the good really quickly, because the customers dont want to wait too much when they really need something. Seven-eleven is known to sell and have almost everything you need, so it is better not to let shelves empty, it is also not good for the trade reputation if people can see empty space in the store. We can say that all these shelves crowded of stuffs show that the supply chain is really well manage. Seven eleven used the franchise system in Japan; of course it is much easier to franchise the store because if you have too many stores you cannot handle everything. This system counts over 68 percent of the revenue from operations. It supported Seven Eleven stores to have a high-density market presence. Using the franchise system, Seven Eleven got six advantages of the market dominance strategy. First, it boosted the distribution efficiency because they opened more retailers, so the distribution center could be closer from an important amount of stores. Second, Improved brand awareness, of course more store you have and more famous you will be, so people finding seven eleven stores everywhere thought it was secure and a good brand. Third, increased system efficiency, if we have a lot of people working on the system and using it, of course it increases the efficiency. Fourth, enhanced efficiency of franchise support services, in the market dominance the number of stores is really imp ortant, so more you are in and faster your support services increase. Fifth, Improvement of the advertising effectiveness, in Japan in some places we can find a lot of seven eleven, that means there is a lot of advertising because people are using them to buy anything. Sixth, Prevent competitors entrance into the dominant area, managers instead of opening their own retail store, they use the seven eleven franchise system because it is much easier to start and to be in the dominant area at the beginning. As we can see now the franchise system is really important for seven eleven Japan, the system is pretty simple. Both parts, the franchise owner and seven eleven Japan, have responsibilities. First the owners have to manage the store and the staff, make orders and maintain the store appearance. In another side Seven eleven Japan manages almost everything in developing the store, orders and accounting. Seven eleven also provide advertising and pay 80 percent of the utility cost. Seven eleven had more than 12  000 stores in Japan. In 2004 the size of the regular store increase from 125 to 150 square meters. The total size of all the seven eleven stores in Japan is about 1  530 square kilometers, it means almost 15 times the Paris size. It is huge for a country small like Japan. Seven Eleven Chain offers more and more services every year, besides products. They gradually added a variety of services that customers could obtain at its stores. They started offering other services in 1987; the system was offering you to have to possibility to pay your Tokyo Electric Power bills. Later the people could pay other bills, like gas, insurance, and telephone. This service attracted millions of additional customers every year. Another example that is in 1995 they started to accept payment for mail order purchases. Another huge service that they offer is to have an ATM in the shop; they started offering this in 2004. The ATM project was huge, because they started to instal l in 75 percent of the retailers, with the goal to achieve 100 percent ATM installation. The 7-dream concept arrives at the right time, because in 2000 the internet is starting to be well used by customers. In Japan people work a lot and really hard, so sometimes that understandable they like to shop on internet, choose what they want and pick it up at their convenience store. The 7-dream concept is really useful, but the delivery system is likely more successful in a country like the United States, where people love to have the product directly deliver at their homes. Seven eleven in the United States it is the second largest market in the world for seven eleven. Even if at the beginning several 7-eleven were shut down. The number of retail stores grown after 1998, because the distribution structure was completely different from the Japanese system. In fact in the USA we can see that DSD (direct store delivery) are pretty common, it was awkward to see that in Japan. The fresh products obliged 7-eleven to use CDCs (Combined distribution centers), because it was super important to be able to deliver real fresh products like sandwiches, bakery, and bread in time to the stores. At this time Seven Eleven tried to introduce a new concept in the convenience store system, they wanted to be different than a normal gas station.

National Socialism: The Loss of Individuality Essays -- Essays Papers

National Socialism: The Loss of Individuality National Socialism in Germany between 1933 and 1945 offered no room for individuality. The unification of Germany and the purification of the Arian race did not allow for the citizens in Nazi Germany to have any singularity. The rise of National Socialism was due to many linked motivations, from the disgrace that the Germanys were feeling after their defeat in the First World War, to the racism against the Jews that plagued all of Europe. After World War One Germany was demolished, both economically and agriculturally. Then, under the terms of the Treaty of Versailles, Germany was charged with sole responsibility for the war, and was forced to pay costly reparations. This all added to the desperation of the country to form a stronger country. Germany would soon be one of the most powerful states in the world. The National Socialist, in their struggle to rebuild their country and its unity, had two goals. First, they promised to rid the state of national disgrace and desperation. This promised to be completed in a brief period of time. The National Socialist of Germany thought that the sooner it could get back on its feet, the sooner it could become the strongest power in the world. The second goal was to get rid of the absolute monarchy. This was so important to the plan for Germany that they were not concerned whether it be done legally or not. (Dulffer 16-17) In The Enabling Act of 1933 Adolf Hitler, the nationalist leader, was granted dictatorial powers, ending the Weimar Republic. This began the dictatorship that would change the course of history. Hitler (for more information click on picture) gave the members of the Nazi party high... ... camps. This illustrates the power that the National Socialist had in keeping individuality restrained for the â€Å"good† of the community. National Socialism between 1933 through 1945 was a breakdown of individualism. The Nazi control of German unified a country, while tearing apart a world. The reasons for the rise of this totalitarian state are vast, but closely linked together. Through the disgrace of the First World War, and the desperateness of Germany to find a scapegoat, millions of lives were taken for the â€Å"common good† of the Aryan race in Germany. Bibliography - Abel, Theodore. Why Hitler Came to Power. London: Hrvard Collage, 1966. - Duffer, Jost. Nazi Germany 1933-1945 Faith and Annihilation. New York: St. Martin's Press, 1992. - Mosse, George L. The Crisis of German Ideology. New York: The University Library, 1964.

Behaviour Problems That Should Be Referred to Others and to Whom These Should Be Referred

Supporting Teaching and Learning in Schools – OCR Level 2 Certificate Assignment – Unit 4: Equality, diversity and inclusion in work with children and young people Task A – Promoting equality and diversity Complete answers to the following. 1. Identify current legislation and codes of practice relevant to promoting equality, diversity and inclusion when working with children and young people (Ref. 1. 1) 2. Describe why it is important to support the rights of all children and young people to: a)Participation: b)equality of access (Ref 1. 2) 3.Why is it important to value and promote cultural diversity and what are the benefits of doing so? (Ref. 1. 3) Assignment – Unit 4: Equality, diversity and inclusion in work with children and young people Task B – The impact of prejudice and discrimination Give three examples of children or young people who may be affected by prejudice and discrimination and say how you might deal with this in your role as a su pport assistant in your workplace. (Ref 2. 1, 2. 2, 2. 3, 2. 4, 2. 5) Assignment – Unit 4: Equality, diversity and inclusion in work with children and young people Task C – Inclusion 1.Explain what inclusion means and give at least two examples of inclusive practices in your workplace. (Ref 3. 1, 3. 2) 2. How is inclusion promoted through the education system? (Ref. 3. 3) Assignment – Unit 204: Equality, diversity and inclusion in work with children and young people I confirm that this assessment has been completed to the required standard and meets the requirements for validity, currency, authenticity and sufficiency. Tutor/assessor’s signature: Date: I confirm that the assignment work to which this result relates, is all my own work. Candidate signature: Date: Internal verifier signature: Date:

Contrasts of North and South essays

Contrasts of North and South essays In this assignment, I found that there were several issues that were recurrent themes within the Union as well as the South. The differences were in the beliefs of the respective sides. In the assigned reading, it is readily apparent how the themes related to the nature of Northern and Southern society or the Civil War. The first theme is secession. The ideas on secession varied in the North and South and, were in fact, usually polar opposites on the respective sides. The secession of the Southern states is central to this chapter of American History. In the North, people were concerned about the secession movement. When Lincoln gave his inaugural address, he addressed the Northern concerns. It follows from these views that no state upon its own mere motion can lawfully get out of the Union: that resolves and ordinances to that effect are legally void, and that acts of violence within any State or States against the authority of the United States are insurrectionary or revolutionary, according to circumstances. Lincoln went on to state, Plainly the central idea of secession is the essence of anarchy. Lincoln said that the South was the minority and the minority could not make the rules that would affect the majority. The rule of a minority, as a permanent arrangement, is wholly inadmissible; so that, rejecting the majority principle, anarchy or despotism in some form is all that is left.... Lincoln also warned of the consequences of secession and how it would affect the seceding parties. If a minority in such case will secede rather than acquiesce, they make a precedent which in turn will divide and ruin them, for a minority of their own will secede from them whenever a majority refuses to be controlled by such minority.... George Templeton tells in his account, The Outbreak of War Galvanizes New York City, about the common peoples reactions t...

Historical Journal to Write a Review of the Book “Can’t stop Won’t stop” Essays

Historical Journal to Write a Review of the Book â€Å"Can’t stop Won’t stop† Essays Historical Journal to Write a Review of the Book â€Å"Can’t stop Won’t stop† Essay Historical Journal to Write a Review of the Book â€Å"Can’t stop Won’t stop† Essay Name: Lecturer: Course: Date: Historical Journal to Write a Review of the Book â€Å"Can’t stop Won’t stop† The historical content of the book â€Å"Can’t stop Won’t stop† by Jeff Chang has been argued as the most valuable in terms of addressing the hip-hop music that has risen to become an American art. The book makes a generous recount of the origin of hip-hop, which has shown its beginning from a generation of neglected children from Bronx who changed their world through dancing, art, music, speech and fashion as well. Although the book has mainly focused on hip-hop, it has also provided an account of a people’s history. The book has tackled diverse areas that include relationships between races, globalization, media studies, multicultural as well as polycultural issues, containment politics and issues of abandonment. The book provides the best case of hip-hop history as a complete American art. The book starts with an exploration of the social conditions of New York, largely focusing on the South Bronx during the years that led to the birth of hip-hop. Although this part is not directly related to hip-hop, it is among the most important parts towards understanding the history of hip-hop as well as what makes it a special art in America. The social history of Bronx where it started provides a good account of the historical background leading to the birth of hip-hop. Chang describes the most important event leading to birth of hip-hop as the construction of the cross-Bronx Expressway that forced people to change where they lived (Chang 12). Blacks were forced to move to South Bronx where social housing was available but limited jobs. The economic condition of South Bronx had been worsening where about 80% of youth were unemployed. Because of unemployment, many gangs formed in self-defense efforts as well as affiliation depending on races. This had affected racial interaction where white youths formed their gangs as blacks and Latinos formed theirs as well. Hip-hop came as music for party from these gangs. It included graffiti, arts, dancing such as break dancing and a mixture of several arts that included black, Hispanic and several others (Chang 42). Clearly, it was a way of expressing themselves as well as defining an identity with which to associate. The social history provides a deeper understanding of the historical content surrounding the rise of hip-hop as well as its purpose. After addressing the historical events leading to hip-hop, Chang now turns to expansion of hip-hop where it was used as a medium of commenting on politics through rap. It was seen as the voice of those who were not supposed to be heard within the society. Recounting its evolution such as the political rap provides a historical purpose of hip-hop art. He describes the hip-hop generation from its heights to its lows. This way, he is able to provide a historical account of its origin as well as what influences this art. For instance, the 1980s saw the emergence of political rap, due to the political events of slashing budget meant to support the poor at the time. This allows the reader to have a clear view of its purpose and trend over the years (Chang 312). It is clear that hip-hop is a art in America, a art that is influenced by the greater change within the national level, as well as global realm. Hip-hop generation has continued to evolve with the changing times. While it was rising up during its birth, it was out of poverty and lack of employment. It went on to address political issues within the society and currently addresses issues within the broader society. This has been easy to realize after reading the book. Its flow, as well as arrangement of chapters from a social background to its rise provides a rich knowledge of hip-hop generation as a art that is not going to end. It provides a good historical account, which explains its purpose of existence as well as events leading up to its birth, which provide strong root for the hip-hop art. This makes the book quite a valuable literal work that tracks the emergence of a art that has risen from impoverished youths to influence people within United States, as well as the whole world . Work cited Chang Jeff. Can’t Stop Won’t Stop: A History of the Hip-Hop Generation. New York, N.Y: Ebury Publishing, 2011. Print.

Critical Response Paper I Research Example | Topics and Well Written Essays - 500 words - 1

Critical Response I - Research Paper Example This soft and tender film has lots of melodrama puts emphasis on characters’ affiliation dynamics and do not have any major male characters (Almodovar Film). The producer may have been female chauvinist or he was rather interested in exposing female behaviors. Perhaps Pedro Almodovar wanted to show the dark side of the religion such as drugs, sex and violence that has dominated his country and the world at large. The movie offers best lessons to the immoral society and can therefore be regarded as educative and provocative in a way. The film is stylistically produced through the use of long sinuous tracking shots which makes it more interesting to follow. There is also domination of red color such as Yolanda’s red nails which symbolizes danger or the unreligious theme of the film (Almodovar Film). This film can also be described as widely funny and gusts with lots of unavoidable scandal and can also be thought as silly. There is great humor when the nuns sympathetically forgive people who have committed sin simply because the nuns are more sinners than others. This is one of the unique behaviors in the film that cannot be expected in the normal situation (Kinder 343). The film characterization hypocritically shows what they denounce making the film to sound absurd and justification of the spiritual crisis. Almodovar does not give required emphasis to some of the Dark Habits’ issues such as rampant drug abuse and other sneaky sins. The producer must have been guided by urge of finding moral purpose in the current immoral world which has gone astray with hypocrisy. Pedro is indeed a great artist particularly considering his inventive camera angles and the surreal anti-religious acts in the movie (Almodovar Film). Dark Habits reveals much about the catholic religion which is dominated by male and gives great reverence to Virgin Mary. Exposure

Why starting a franchise is better than starting a new business Essay

Why starting a franchise is better than starting a new business - Essay Example As a matter of fact, there is a vast array of different available alternatives and opportunities such that it is often difficult to decide on the best plan to follow. After choosing the best path, one would require help starting the business, hence the need to appreciate the differences between starting a business and franchising opportunities, as well as choosing which plan is the most applicable (Bradach 99). Although franchising is similar to starting one’s own business in various aspects, these business initiatives are inherently quite dissimilar. This paper will examine the reasons why it is better to start a franchise rather than a new business. Broadly speaking, franchising refers to the means of operating a commercial operation through the use of certain elements or aspects of other businesses, for instance, its products, brand and name. Previously, this entailed licensing agreements where business operators had the right to sell certain products in certain markers, di stribution deals that work on the same basis or other form of agency agreement in which one runs part of a greater business. However, today, franchising refers to the granting of licenses to trade under similar names as the parent companies and to make use of all or most of the aspects, which make these businesses successful to enable one’s venture to strive. ... Such support, however, runs for the duration of the franchise agreement. The contract entails the franchisee agreeing to pay the franchisor for the privilege to use such support and business tools. In most instances, such payment is made upfront although the franchisee has to pay numerous staged payments as the business develops (Libava 81). However, it is evident that certain franchise agreements stipulate that franchisees have to make additional payments if the business grows to be exceedingly successful, but, in most cases, this amount is a regular flat rate. Although in most cases the startup cost of starting a franchise is quite large, this cost is substantially lower than the cost of starting the same business from scratch. Some of the most notable franchises include, among others, Subway, Hampton Hotels, 7-Eleven Inc, Anytime Fitness, Supercuts and McDonald’s and Pizza Hut Inc. These businesses are quite profitable and their brands are widely acclaimed all over the worl d. Starting such a business from scratch can cost quite a lot. However, franchising allows business owners to pay low costs in order to start these businesses. For instance, in order to start franchises such as McDonald’s, one only requires between $1.07 million and $1.89 million, to start a Subway franchise one needs between $85,200 and $260,350. On the other hand, in order to start a Hampton Hotel franchise, one must pay the franchisor between $3.7 million and $13.52 million. These figures go to show that starting a franchise is way cheaper than establishing such a massive company. Perhaps one of the most attractive aspects of franchising is the reduction of risk. The business is not essentially a new

Hotel Industry Research Proposal Example | Topics and Well Written Essays - 2250 words

Hotel Industry - Research Proposal Example An Organizational structure defines how job tasks are formally divided, grouped and coordinated. The main elements to consider while designing an organizational structure are Work Specialization, departmentalization, chain of command, span of control, centralization and decentralization and formalization. The most common Organizational designs found in use are The simple structure is characterized by a low degree of departmentalization, wide spans of control, authority centralized in a single person, and little formalization. The strength of the simple structure lies in its simplicity. It's fast, flexible and inexpensive to maintain and accountability is clear. One major weakness is that it is difficult to maintain in anything other than a small organization. The decision making becomes slow as the organization grows in size because of its low formalization and high centralization. A bureaucracy is characterized by highly routine operating tasks achieved through specialization, much formalized rules and regulations, tasks that are grouped into functional departments, centralized authority, narrow spans of control, and decision making that follows the chain of command. The primary strength of bureaucracy lies in its ability to perform standardized activities in a highly efficient manner. One of the major weakness of this structure is that it causes departmental conflicts and highly inflexible always following the rules. There is no room for modification The Matrix structure is characterized by dual lines of authority and combines product and functional departmentalization. IBM adopts a modified version of the matrix structure in its overall operations. The strength of this structure lies in its ability to facilitate coordination and efficient allocation of specialists. The major disadvantage lies in the confusion it creates, its prosperity to foster power struggles, and the stress it places on individuals. The Team structure uses teams as the central device to coordinate work activities. Companies like DaimlerChrysler, Saturn, Motorola and Xerox have made extensive use of self managed teams to improve productivity at the operational level. In smaller companies, the team structure can define the entire organization. For instance, Imedia, a 30 person marketing firm in New Jersey is completely organized around teams. This structure is highly unsuitable for large companies. A Virtual organization is a small core organization that out sources major business functions. Ancle Hsu and David Ji run a virtual organization. Their firm, California based Apex Digital, is one of the world's largest producers of DVD Players, yet the company neither owns a factory nor employs an engineer. They contract everything out to firms in China. This is suitable for small and large organizations. The major advantage is the flexibility and the disadvantage is lack of managerial control in key aspects of business. The Boundaryless organization is an organization

Magnetic Tape Essay Example for Free

Magnetic Tape Essay Magnetic tape is a medium for magnetic recording, made of a thin magnetizable coating on a long, narrow strip of plastic film. It was developed in Germany, based on magnetic wire recording. Devices that record and play back audio and video using magnetic tape are tape recorders and video tape recorders. A device that stores computer data on magnetic tape is a tape drivOver years, magnetic tape can suffer from deterioration called sticky-shed syndrome. Caused by absorption of moisture into the binder of the tape, it can render the tape unusable. Merits: Capacity * One of the key advantages of magnetic tape is its capacity for holding data. Magnetic tape was the first medium able to hold a feature-length movie on a small, inexpensive device, thus enabling the home video market of the 1980s. In addition, compact cassettes can hold music on both sides, giving them a 90-minute total playing time, which is even greater than most CDs. Editing * Magnetic tape is also easy to edit using a traditional linear-editing system. This can involve duplicating a portion of a tape to a master reel, or physically cutting the tape and attaching the desired portions together with glue, splicing cement or adhesive tape. Editing in this manner requires no special computer equipment and may be less expensive and/or easier to learn than nonlinear digital editing. DEMERITS: Generation Loss * One of the disadvantages of magnetic tape is generation loss, which refers to the fact that each successive copy of a tape loses quality compared to the original. This can make it difficult to use magnetic tape for editing-intensive projects, or when extremely high fidelity is important. Digital media, on the other hand, can be copied and reproduced indefinitely with no visible or audible difference between the original and any of its copies. Durability * Another problem with magnetic tape is its tendency to stretch out over time, causing the quality of the data to deteriorate. On old video tapes, this generally appears in the form of poor audio, and picture data can eventually suffer as well. Over time magnetic tape acquires a layer of magnetic debris from recording and playback heads, which may need to be cleaned periodically to continue functioning. Mechanical Complexity * The mechanical complexity needed to use magnetic tape is another disadvantage of the medium. Items like cassette and VHS tapes include two separate reels, as well as a mechanism for exposing a small portion of the tape inside a player or recording device. Reel-to-reel tape players use multiple motors and moving parts, each of which is susceptible to mechanical failure. In the realm of digital media, flash-based memory uses no moving parts, thus eliminating this problem. Advantages and Disadvantages of a USB Flash Drive February 27, 2012 Advantages and disadvantages Advantages Compared to hard drives, flash drives use little power, have no fragile moving parts, and for most capacities are small and light. Data stored on flash drives is impervious to mechanical shock, magnetic fields, scratches and dust. These properties make them suitable for transporting data from place to place and keeping the data readily at hand. Flash drives also store data densely compared to many removable media. In mid-2009, 256 GB drives became available, with the ability to hold many times more data than a DVD or even a Blu-ray disc,[2] Most personal computers support USB as of 2010. Flash drives implement the USB mass storage device class so that most modern operating systems can read and write to them without installing device drivers. The flash drives present a simple block-structured logical unit to the host operating system, hiding the individual complex implementation details of the various underlying flash memory devices. The operating system can use any file system or block addressing scheme. Some computers can boot up from flash drives. Specially manufactured flash drives are available that have a tough rubber or metal casing designed to be waterproof and virtually â€Å"unbreakable†. These flash drives retain their memory after being submerged in water, and even through a machine wash. Leaving such a flash drive out to dry completely before allowing current to run through it has been known to result in a working drive with no future problems. Channel Five‘s Gadget Show cooked one of these flash drives with propane, froze it with dry ice, submerged it in various acidic liquids, ran over it with a jeep and fired it against a wall with a mortar. A company specializing in recovering lost data from computer drives managed to recover all the data on the drive.[42] All data on the other removable storage devices tested, using optical or magnetic technologies, were destroyed. Disadvantages Main article: Flash memory#Limitations Like all flash memory devices, flash drives can sustain only a limited number of write and erase cycles before the drive fails.[43][unreliable source?][44] This should be a consideration when using a flash drive to run application software or an operating system. To address this, as well as space limitations, some developers have produced special versions of operating systems (such as Linux in Live USB)[45] or commonplace applications (such as Mozilla Firefox) designed to run from flash drives. These are typically optimized for size and configured to place temporary or intermediate files in the computer’s main RAM rather than store them temporarily on the flash drive. Most USB flash drives no longer include a write-protect mechanism, although a small number have a switch on the housing of the drive itself to keep the host computer from writing or modifying data on the drive. Write-protection makes a device suitable for repairing virus-contaminated host computers without risk o f infecting the USB flash drive itself. A write-locked SD card in a USB flash card reader adapter is an effective way to avoid any writes on the flash medium. The SD card as a WORM device has an essentially unlimited life. A drawback to the small size is that they are easily misplaced, left behind, or otherwise lost. This is a particular problem if the data they contain are sensitive (see data security). As a consequence, some manufacturers have added encryption hardware to their drives—although software encryption systems which can be used in conjunction with any mass storage medium achieve the same thing. Most drives can be attached to keychains, necklaces and lanyards. The USB plug is usually fitted with a removable and easily lost protective cap, or is retractable. USB flash drives are more expensive per unit of storage than large hard drives, but are less expensive in capacities of a few tens of gigabytes as of 2011 Maximum available capacity is increasing with time, but is less than larger hard drives. This balance is changing, but the rate of change is slowing.. Most USB based flash technology integrates a printed circuit board with a metal tip which is simply soldered on. As a result the stress point is where the two pieces join. Some manufacturers quality control does not ensure a proper solder temp further weakening the stress point. Since many Flash Drives stick out from a users laptop or PC they are likely to be bumped repeatedly in their life time and may break at the stress point. Most of the time a break at the stress point results in permanent damage to the printed circuit board where the joint is torn from the circuit. However, some manufacturers produce discreet flash drives that do not stick out and others use a solid metal uni-body that has no easily discernible stress point.

What inspires you? :: essays research papers

What inspires you?   Ã‚  Ã‚  Ã‚  Ã‚  I have two things that inspire me in my life. One of them is my parents especially my mother, the other is the accident of my dad ¡Ã‚ ¯s company occurred in recent.   Ã‚  Ã‚  Ã‚  Ã‚  I will talk about the accident happened in March of this year. I live in States but my parents live in Korea. Only way we contact is using phone, or I visit them for every summer and winter vacation. If they don ¡Ã‚ ¯t tell me what is going on in our family there is no way to figure out that when I am in States. When I got home for this summer vacation, my dad asked me to come home early one day and he said that there is a serious thing that he wanted to talk to me. I had no clue what was going on. He said that there was a fire broken out in his factory. He owns huge furniture factory and he is C.E.O of this company. The biggest storage of his plant was gone because of the fire. It was about 1.8 million dollars worth, and it ¡Ã‚ ¯s gone now. People said that it was on the TV and newspaper for 3 days as a big tragedy. I visited there and I saw people working there to build new one again. The first problem he got was the loss of his assets and the second one was that he was getting too much of stress from that. I always got my personal expenses from my dad during vacation, but I just decided to work and make money. I know it is hard since I am taking 10 credits of summer courses during whole summer vacation. I strongly felt that I need to do something for my dad. So I applied one of the biggest accounting corporation in Korea, I got accepted as intern. It ¡Ã‚ ¯s been a little bit more than a month I ¡Ã‚ ¯ve been working, but the problem is that I only get 3hours sleep except the weekend. After I get home from work I eat dinner and start my homework and quizzes for my summer courses then I can go to sleep at around 3 or 4 o ¡Ã‚ ¯clock in the morning. I get really tired physically and mentally but when I think about what my dad was suffering from the accident it is nothing. I started thinking in positive way that this is good opportunity to overcome the suffer in my life. What inspires you? :: essays research papers What inspires you?   Ã‚  Ã‚  Ã‚  Ã‚  I have two things that inspire me in my life. One of them is my parents especially my mother, the other is the accident of my dad ¡Ã‚ ¯s company occurred in recent.   Ã‚  Ã‚  Ã‚  Ã‚  I will talk about the accident happened in March of this year. I live in States but my parents live in Korea. Only way we contact is using phone, or I visit them for every summer and winter vacation. If they don ¡Ã‚ ¯t tell me what is going on in our family there is no way to figure out that when I am in States. When I got home for this summer vacation, my dad asked me to come home early one day and he said that there is a serious thing that he wanted to talk to me. I had no clue what was going on. He said that there was a fire broken out in his factory. He owns huge furniture factory and he is C.E.O of this company. The biggest storage of his plant was gone because of the fire. It was about 1.8 million dollars worth, and it ¡Ã‚ ¯s gone now. People said that it was on the TV and newspaper for 3 days as a big tragedy. I visited there and I saw people working there to build new one again. The first problem he got was the loss of his assets and the second one was that he was getting too much of stress from that. I always got my personal expenses from my dad during vacation, but I just decided to work and make money. I know it is hard since I am taking 10 credits of summer courses during whole summer vacation. I strongly felt that I need to do something for my dad. So I applied one of the biggest accounting corporation in Korea, I got accepted as intern. It ¡Ã‚ ¯s been a little bit more than a month I ¡Ã‚ ¯ve been working, but the problem is that I only get 3hours sleep except the weekend. After I get home from work I eat dinner and start my homework and quizzes for my summer courses then I can go to sleep at around 3 or 4 o ¡Ã‚ ¯clock in the morning. I get really tired physically and mentally but when I think about what my dad was suffering from the accident it is nothing. I started thinking in positive way that this is good opportunity to overcome the suffer in my life.

How Does Hughes Create An Effective Description of a Windy Day?

Hughes uses a variety of poetic techniques to create an effective description of a windy day. He uses a lot of figurative language, such as metaphor, simile and personification. Hughes also creates the effect of a windy day using structural techniques such as enjambement, and the sound technique onomatopoeia. He often uses interesting lexis to help our imaginations. Hughes uses a lot of figurative language in this poem. One particularly effective technique is metaphor. He starts the poem with the metaphor – â€Å"This house has been far out at sea all night† This is very effective because it creates a very strong picture in your mind. â€Å"Far out† suggests isolation, and a mention of night suggests danger and fear. Another effective example of metaphor is â€Å"The skyline a grimace†. This suggests that the whole view and landscape is grotesquely distorted. A grimace means to pull a strange face, so this makes it an example of personification. The mental image is very clear too. Simile is another example of figurative language use by Hughes in this particular poem.What is the difference between a figurative and a literal analogy? â€Å"Flexing like the lens of a mad eye† This suggests that the view is constantly moving with the wind and the movement in my mind is visualised as everything bending, swaying and generally looking contorted. Similes are used throughout Hughes's poem. Another magnificent example of a simile is â€Å"Rang like some fine green goblet† This makes the house seem very delicate, as a glass will shatter if it resonates at a certain pitch. Glass is brittle anyway, so using this particular material as a simile would automatically suggest fragility. Another example of simile is â€Å"Black gull bent like an iron bar slowly†. This suggests that the gull is fighting against the wind's strength with all it's might. The mental picture it puts into my mind is very clear, and it makes me think that the wind is very powerful. Personification is a type of figurative language, giving an inanimate object humane characteristics. An example of personification occurs in line 13 of the poem: â€Å"The fields quivering, the skyline a grimace† The fields are ‘quivering' which suggests that they are afraid of the wind, and are shaking and ducking down to avoid the devastation that the wind can cause. In actual fact, the wind makes the grass bend over. Hughes uses structural techniques in his poetry, and enjambement is the one that probably stands out the most.

American Contibution to the Philippines Essay

Contribution of American to the Philippines 1. Independence – America helped the Philippines to eliminate the Spaniards in the country thus helping the Filipinos to end the suffering from the Spanish reign. This was the first step of the country to stand on their own and start a new beginning. 2. Government -we adapted and patterned some of our constitution with the Americans’. 3 Sports – Filipino favourite sport had been basketball, and other foreign sports instead of the national sports which is sipa. 4. Western style of clothing – this was also adapted as it is evident with the radical change from the conservative Maria Clara to the daring trends of fashion of the modern era 5. Communication – The Americans brought English, the lingua franca of the modern world 6. Principles – progressive liberal ideologies such as egalitarianism, democracy and equality 7. Education – they endowed an educational system patterned after that of the U.S. They sent educators in the Philippines which are known as Thomasites. However, American style of re-education was amero-centric in nature, causing Philippine society to self stigmatize itself in favor of American-centered products and ideologies. Effects of American Colonization in the Philippines. Effects of American Colonization in the Philippines.The effects of American imperialism on the Philippines are numerous. Some, however, stand out, most notably the installation of an American-style democracy and the prevalentattitude that anything American is â€Å"good†. Many of those in lowland Philippines, and most of the Christian population, for that matter, grew up in an increasing Americanizedsociety. The following American influence in the Philippines says it all: 1. Government -Partisan politics was one of the influences of the Americans on our government. Partisan politics means a politics that is devoted to or biased in support of a certain party, group or cause. Another effect of Americans in the government is the implementation of municipal elections. But after the creation of bicameral legislature, the election in the Philippines turned to be like the election of the Americans. Electors began to spend a lot just to win the election, and they began to think of their own personal welfare instead of the welfare of the Filipino people. Thus many of the American’s political practices were soon found in the Philippine archipelago. But this doesn’t mean that Americans contributed negative effects on our government but instead we learned the intricate machinery of the government, we learned how to make and governs laws. 2. Religion -During the Spanish colonization, the Filipino people were forced to convert their religion into Christianity (Roman Catholic). But after the colonization of the Spanish, Americans came and changed the religion into Protestantism which was the religious beliefs of the Americans. But later on, the Americans adopted the Roman Catholic Christianity after its invasion in the Philippines on July 4, 1946. Another is the establishment of the Iglesiani Cristo Church by Felix Manalo. And Jehovah’s Witnesses started to preach from one house to another. 3. Economic and Livelihood -The economic development of the Philippines under the Americans can be attributed to free trade relations that the Americans imposed upon the country. Philippine products were also allowed to enter American markets free of duty within quota limits. 4. Arts, Culture and Tradition -Filipino people began to adopt the American fashion statement using hats, long sleeved clothes and long sleeved polo inside it with matching neck ties for men. Another is the art of Oil Paintings which is the process of painting with pigments that are bound with a medium of drying oil. Red Blood Paint was also introduced which is a dark paint, also known as alizarin crimson school. 5. Transportation -A lot of transportation was introduced by the Americans to the Philippines, some are submarine, caretellas, railways, ancient bull carts, cars, etc. 6. Social Structure -Americans introduced the three class-models which includes the rich (wide array of elite groups), middle class (ambiguously defined social classes) and the poor (group that suffers from poverty). 7. System of Education -Schools were built for the Filipino citizen that teaches about the good formation including the rights and responsibilities of each person. American Colonial Policy – They promised to train the Filipinos in Democracy and Self-Government. They want the Philippines to stand on its own as a free and independent nation. – They shared power with the Filipinos in the government. Human Rights were protected. They developed the economy, improved hygiene and sanitation, and introduced the public school system. Contribution of Americans to the Philippines 1. Ecomonic Progress: – Population Explosion – New Land Policy – Agriculture Increase – Free Trade America – Business Flourished – New Industries – Improvements of Transportation and Communication – Better Budget – New Banks – International Exhibitions and Meetings Economic Problems( NEGATIVE) – We sold our raw materials cheap and bought expensive manufactured goods from America. – Colonial Mentality – Labor and peasant unrest spread in 1920s and 1930s – American Capitalists and businessmen controlled the new companies. – Filipino values like â€Å"pagmamano† was replaced by saying HI or HELLO. – Filipino food like â€Å"bibingka and suman† were replaced by American food like hotdog and French fries. Other American Contributions – Religious Freedom – Training in Democracy – Free Education – Better Health Service – Introduction of the English Language – Free Press – Democratic Family Life and Social Classes – Emancipation of Women – Recreation, Movies, Theater, Arts and Science ______________________________________________________________________________ Contribution of Spanish to the Philippines – Education- Science – Entertainment – Agriculture- Manner of Dressing- Architecture – Spanish Names (Trece Martires, La Trinidad,Aurora, La Union,Nueva Ecija) – Arts, Music and Literature (folk dance) – Language(nanay/nantl, tatay/tatle,abokado/avocado) – Religion(roman catholic) – Food (afritada,Estopado,Escabeche, pastel de lengua) – Spaniards introduced different forms of entertainment like: – Cockfighting- Flores de Mayo – Moro- moro- Santacruzan – Zarzuela- Duplo – Balagtasan- Different form of card games Reasons for Colonization: The 3 Gs (Spanish) GOD – the conversion of natives to Christianity GOLD- accumulation of gold or wealth GLORY- supremacy of spain over potugal as a superpower Social and Cultural Influences of the Spanish – The natives refused to cast off their indigenous cultural heritage and accommodated European art, literature, rituals and practices only after some modification. – Use of Gregorian calendar – Alphabet- dressing- burial pratices- wedding practices – Changes in names- adoption of fiesta-cuisine – western architecture (cottas or fortress, churches †modified Romanseque style†, antillen house – Language( chavacano,cebuano) – Literature – Painting (Juan Luna and Felix Resurreccion Hidalgo) – Sculpture (retablos, relleves â€Å"carved images in relief†) – Graphic arts (estampas, La Illustraccion Filipina) Negative features of the Spanish Colonial Government in the Philippines The indigenous population was relocated into settlements while conquistadors, friars and native nobles were granted estates in exchange for their services to the King, They were given the privilege to collect tribute from its inhabitants. In return, the encomienda were to provide military protection to the inhabitants; however, the system was abused and was largely replaced by administrative provinces by 1700. The encomienda system of government used by Spain was disliked by the inhabitants, which resulted in uprisings. A system of forced labor was also a result of the encomienda system of government. Encomienda – was a legal system that was employed mainly by the Spanish crown during thecolonization of the Americas to regulate Native American labor.

Free Essays on False Justice

False Justice Leandro Anrade, a thirty-seven year old man with a non-violent record, was sentenced to fifty years to life in prison for stealing 153 dollars worth of videotapes. Leandro’s sentence is a raw product of California’s Three Strikes Laws. California’s Three Strikes Laws were erected in March of 1994 and have been the center controversy since their debut. Basically the laws state that if anyone is convicted of any crime three times and it can be three different crimes, whether it be a petty, or serious crime, they are sentenced to twenty-five years to life automatically. (Marks 2) Do these laws even seem remotely rational? Not according to California prosecutors, who only use the law in about ten percent of the eligible cases. (Dolan and Perry 3) That means ninety percent of all prosecutors in California ignore the ludicrous laws because they are not reasonable judgments. Why would you even have the laws when it doesn’t achieve the purpose it was produced to do? The reason behind that question lies in one major fallacy; the laws are unjust to petty crime offenders. When California’s voters condemned the laws in 1994 they were put under the influence that it would only pertain to felony, or serious crime convictions. The fact that someone can be sent to jail for at least twenty-five years for writing bad checks, stealing videos, selling drugs and so forth is unfair to the criminals and the tax payers of California who have to pay for larger prisons to welcome in the massive amounts of criminals who are sentenced under the three strikes laws, sixty percent of them being non-violent offenders. (Marks 2) Overall the laws have decreased the crime rates in California, but that can also be the result of a trend in that generally the whole country has been experiencing within the last ten years. These unreasonable laws should be altered in that they should only pertain to felonies and serious offenses. Even though I fee... Free Essays on False Justice Free Essays on False Justice False Justice Leandro Anrade, a thirty-seven year old man with a non-violent record, was sentenced to fifty years to life in prison for stealing 153 dollars worth of videotapes. Leandro’s sentence is a raw product of California’s Three Strikes Laws. California’s Three Strikes Laws were erected in March of 1994 and have been the center controversy since their debut. Basically the laws state that if anyone is convicted of any crime three times and it can be three different crimes, whether it be a petty, or serious crime, they are sentenced to twenty-five years to life automatically. (Marks 2) Do these laws even seem remotely rational? Not according to California prosecutors, who only use the law in about ten percent of the eligible cases. (Dolan and Perry 3) That means ninety percent of all prosecutors in California ignore the ludicrous laws because they are not reasonable judgments. Why would you even have the laws when it doesn’t achieve the purpose it was produced to do? The reason behind that question lies in one major fallacy; the laws are unjust to petty crime offenders. When California’s voters condemned the laws in 1994 they were put under the influence that it would only pertain to felony, or serious crime convictions. The fact that someone can be sent to jail for at least twenty-five years for writing bad checks, stealing videos, selling drugs and so forth is unfair to the criminals and the tax payers of California who have to pay for larger prisons to welcome in the massive amounts of criminals who are sentenced under the three strikes laws, sixty percent of them being non-violent offenders. (Marks 2) Overall the laws have decreased the crime rates in California, but that can also be the result of a trend in that generally the whole country has been experiencing within the last ten years. These unreasonable laws should be altered in that they should only pertain to felonies and serious offenses. Even though I fee...